Description
Specifications: | |||
Electrical Properties | Typical Values | Test Procedures/Method | |
Outer Surface | <1011 ohms | EOS/ESD S11.11 / ESD S20.20 | |
Aluminum Layer | <102 ohms | EOS/ESD S11.11 /ESD S20.20 | |
Inner Surface | <1011 ohms | EOS/ESD S11.11 /ESD S20.20 | |
Static Decay | <0.05 sec | MIL-PRF-81705D; FTMS 101C, M4046.1 | |
Static Shielding | <25 Nj | EOS/ESD S11.31 /ESD S20.20 | |
Charge Generation | Teflon: 0.09 nC/sq.in. | Modified Incline Plane | |
Quartz: 0.01 nC/sq.in. | |||
Capacitance Probe (to dissipate 1KV) | <30V | MIL-PRF-81705D, EIA 541 , EIA 625 | |
Physical Properties | |||
Polyester Layer | 0.5 Mils Static Dissipative PET film | ASTMD-2103 | |
Aluminum Layer | 10-25 Angstroms | ||
Polyethylene Layer | 2.5 Mils Static Dissipative PE film | ASTMD-2103 | |
Total Thickness | 2.7 to 3.2 Mils | ASTMD-2103 | |
Light Transmission (%) | >40% (Tobias) | ASTMD-2103 | |
Burst Strength (psi) | >50 | FTMS 101K, Method 2065.1 | |
Heat Seal (lbs/in) | >10 | 375oF, 1/2 sec 60 psi | |
Seam Strength | Pass | MIL-PRF-87105D | |
Tensile Strength (lbs) | >25 | ASTM D-882 | |
Puncture Resistance (lbs) | >10 | ASTM D-2065 | |
MVTR (gms/100in/24 hrs, 100F) | <0.40 | FTMS 101C/2065 | |
Abrasion Resistance | >100 cycles | Sutherland Abr. (.0000 steel wool) | |
Out gassing | Pass | ASTM E595 | |
Chemical Properties Corrosion | No effect on aluminum, copper, silver,Sn-Pb coated foil, stainless steel, low carbon steel |