Description
Over View.
Feature a three-layer design, 0.125” Thickness provides excellent electrical, and ergonomic
comfort that only a foam back material can provide. It is compatible for use with continuous monitors. The top layer is made of durable vinyl and it is suited for use as an ESD protective bench mat or tray mat. Its highly conductive Carbon middle layer provides a Quick discharge path to ground. The cushioned dissipative bottom layer provides excellent protection against physical damage. |
||
Construction: | Heat fused vinyl composite |
Thickness: | 0.125″ (3.2mm) |
Hardness: | 45 Shore “A”, per ASTM-D412 |
Tensile Strength: | Greater than 300 PSI, per ASTM-D412 |
Tear Strength: | Greater than 80 lbs/inch, per ASTM-D624 |
Elongation: | Greater than 80%, per ASTM-D412 |
Abrasion Resistance: | Greater than 750 cycles, per Tabor-CS17 |
Heat Resistance: | -20°F to 140°F continuous |
Chemical Resistance: | Resistance to degradation by inorganic acids, organic acids, reducing agents, |
Aliphatic hydrocarbons, mineral oil, aldehydes, and amines | |
Color: | Blue, grey |
Texture: | Light Embossing |
RTT Resistance: 10E6 – 8 Ohms (Test Method: ESD S4.1)
RTG Resistance: 10E6 – 8 Ohms (Test Method: ESD S4.1)
Available in 24, 30 and 36” by 32 ft rolls,
pre-cut, and custom-sized mats.
Colors: Blue and Gray
Grounding: This material must be properly grounded for optimum electrical performance. You may use our Grounding cord
Cleaning: Do not use cleaners with silicone or Alcohol. Silicone buildup will create an insulative film on the surface.
Meets the requirements of ESD Standard 4.1 ESD Standard 20.20, EIA 625, 20.20, EIA 625, MILI-HDBK-263, and MIL-STD-1686